SQT1211
15
Bluetooth
®
operations
By using the Bluetooth
®
connection, you can
listen to the sound of the Bluetooth
®
audio
device wirelessly.
≥
Refer to the operating instructions of the
Bluetooth
®
device for further instruction on
how to connect a Bluetooth
®
device.
Preparation
≥
Turn on the Bluetooth
®
feature of the device
and place the device near this unit.
∫
Bluetooth
®
pairing
1 Touch [
].
≥
If the Bluetooth
®
indicator (blue) blinks fast, go to
step 3.
2 To enter pairing mode, touch and
hold [
] for at least 2 seconds.
≥
The Bluetooth
®
indicator (blue) blinks faster.
3 Select “SC-ALL9” or “SC-ALL6”
from the Bluetooth
®
device’s menu.
≥
The MAC address “
” (“
” stands for a
character that is unique to each set.) may be
displayed before “SC-ALL9” or “SC-ALL6” is
displayed.
≥
The Bluetooth
®
indicator (blue) lights up and the
device is connected to this unit.
∫
Connecting a paired Bluetooth
®
device
1 Touch [
].
≥
The Bluetooth
®
indicator (blue) blinks slowly.
≥
If the Bluetooth
®
indicator (blue) lights, a Bluetooth
®
device is already connected with this unit.
Disconnect it. (
l
right)
2 Select “SC-ALL9” or “SC-ALL6”
from the Bluetooth
®
device’s menu.
3 Start playback on the Bluetooth
®
device.
∫
Disconnecting a Bluetooth
®
device
Touch and hold [
] for at least 2 seconds.
≥
The Bluetooth
®
indicator (blue) blinks slowly.
≥
If prompted for the passkey, input “0000”.
≥
You can register up to 8 devices with this unit. If a 9th
device is paired, the device that has not been used for
the longest time will be replaced.
≥
When [
] is selected as the source, this unit will
automatically try and connect to the last connected
Bluetooth
®
device. If the connection attempt fails, try to
establish a connection again.
≥
When the unit is selected as the speakers powered by
AllPlay, the audio source will change to the network.
≥
Bluetooth
®
cannot be selected as the audio source when
the unit is waiting for the WPS PUSH or WPS PIN code
connection.
≥
This unit can only be connected to one device at a time.
≥
When enjoying video contents with this function, the
video and audio output may not be synchronised.
This function allows you to connect a paired
Bluetooth
®
device when this unit is in standby
mode.
≥
This unit will be turned on automatically when
you connect a paired Bluetooth
®
device.
– If this function is set to “On”, the standby power
consumption will increase.
Touch and hold [
] and [1] for at least
4 seconds.
The mode indicator blinks once.
Bluetooth
®
Stand-by is “On”.
The mode indicator blinks twice.
Bluetooth
®
Stand-by is “Off”.
≥
You can not set this function during the network indicator
blinking in blue and red.
≥
The factory default is “Off”.
Connecting via Bluetooth
®
menu
Bluetooth
®
standby
SC-ALL9&6-SQT1211_mst.book 15 ページ ２０１６年１月１２日 火曜日 午後３時１６分
