manualshive.com logo in svg

Panasonic SC-ALL6, Operating Instructions Manual

Share
Download
Panasonic SC-ALL6 Operating Instructions Manual Download Page 13

SQT1211

13

You can use the app “Panasonic Music 
Streaming” (

l

11) to stream this system’s music 

source (Bluetooth

®

/AUX source, etc.) to other 

speakers powered by AllPlay.

Preparation

≥

Complete the network settings. (

l

7)

≥

Prepare the desired audio source on this 
system (e.g. turn on the connected device, 
etc.).

≥

Install your device with the app “Panasonic 
Music Streaming”.

≥

Connect your device and your speakers 
powered by AllPlay to the same network as 
this system.

1 Turn this unit on.

≥

Check that the network indicator (blue) lights up.

– If the network indicator is blinking in blue and 

red, wait until the blinking stops.

2 Start the app “Panasonic Music 

Streaming”.

≥

Always use the latest version of the app.

3 From “Speaker”, select the speaker 

to stream this system’s audio.

≥

To stream this system’s audio to other speakers  
powered by AllPlay, drag “

” of the desired 

speakers over each other.

4 Select your desired music source 

from the list.

5 Select this system.

The device will start to read the selected music 
source’s information from this system.

≥

This system will change to the selector mode for the 
selected music source.

≥

The speaker selected in step 3 and this system will 
be automatically grouped together.

≥

Depending on the selected music source, playback 
may start. If a content list appears on your device, 
select the desired content to start playback.

≥

You can change the speaker mode setting for the 
unit to left or right channel to make stereo pairing.

≥

The number of speakers powered by AllPlay that 
can perform playback at the same time differs 
depending on the situation of use.

≥

When you turn off one of the speakers powered by 
AllPlay, other speakers in the same group may stop 
the playback.

 

≥

This system will be displayed as “Panasonic ALL9” or 
“Panasonic ALL6” if the device name is not set.

≥

When enjoying video contents with this function, the 
video and audio output may not be synchronised.

Streaming music on this 

system to other speakers 

powered by AllPlay

e.g.,

SC-ALL9&6-SQT1211_mst.book  13 ページ  ２０１６年１月１２日　火曜日　午後３時１６分

Summary of Contents for SC-ALL6









































Reviews:

No comments

Brands by name

Popular brands

Load more brands