16
RQT0A22
Listening to FM radio
You can preset up to 30 channels.
Preparation
≥
Make sure that the antenna is connected. (
l
5)
≥
Turn the unit on.
≥
Press [RADIO/EXT-IN] repeatedly to select “FM”.
≥
A station previously stored is overwritten when another
station is stored in the same channel preset.
1
Press [PLAY MENU] to select “A.PRESET”.
2
Press [
3
,
4
] to select “LOWEST” or “CURRENT”
and then press [OK].
LOWEST:
To begin auto preset with the lowest frequency
(FM 87.50).
CURRENT:
To begin auto preset with the current frequency.*
{.
The tuner starts to preset all the stations it can receive
into the channels in ascending order.
* To change the frequency, refer to “Manual tuning and
presetting”.
1
Press [PLAY MENU] repeatedly to select
“TUNEMODE”.
2
Press [
3
,
4
] to select “PRESET” and then press
[OK].
3
Press [
:
/
6
] or [
5
/
9
] to select the
channel.
∫
Manual tuning and presetting
Select a radio broadcast.
1
Press [PLAY MENU] repeatedly to select
“TUNEMODE”.
2
Press [
3
,
4
] to select “MANUAL” and then press
[OK].
3
Press [
:
/
6
] or [
5
/
9
] to tune to the
required station.
≥
To start automatic tuning, press and hold [
:
/
6
] or
[
5
/
9
] until the frequency starts scrolling. Tuning
stops when a station is found.
To preset the channel
4
While listening to the radio broadcast, press [OK].
5
Press [
3
,
4
] to select the channel and then press
[OK].
∫
To improve FM sound quality
1
While receiving FM broadcasts, press
[PLAY MENU] repeatedly to select “FM MODE”.
2
Press [
3
,
4
] to select “MONO” and then press
[OK].
≥
This setting can be preset and memorised. To do so,
continue to step 4 of “Manual tuning and presetting”.
≥
Select “STEREO” in step 2 to return to stereo broadcasts.
≥
“MONO” is cancelled if the frequency is changed.
∫
To display the current FM signal status
Press [DISPLAY].
≥
For Continental Europe:
Press [DISPLAY] repeatedly to select “FM STATUS”.
≥
“STEREO” is displayed when this unit tunes to a stereo
broadcast.
∫
To display RDS text data
(For Continental Europe only)
This system can show the text data transmitted by the
radio data system (RDS) available in some areas.
Press [DISPLAY] repeatedly.
≥
RDS is available only when stereo works in reception.
≥
RDS may not be available if reception is poor.
Presetting stations automatically
Listening to a preset channel
“FM ST”:
The FM signal is tuned and in stereo.
“FM - - - -”:
There is no tuned signal or the FM signal
is in monaural.
“FM MONO”: “MONO” is selected in step 2 of “To
improve FM sound quality” (
l
above).
“PS”:
Programme service
“PTY”:
Programme type
“FREQ”: Frequency
SC-ALL5CD-EGEBGN~RQT0A22.book 16 ページ 2015年7月17日 金曜日 午前11時30分