22
9 Disassembly and Assembly Instructions
Caution Note:
• This section describes the disassembly and/or assembly procedures for all major printed circuit boards & main compo-
nents for the unit. (You may refer to the section of “Main components and P.C.B Locations” as described in the service
manual)
• Before carrying out the disassembly process, please ensure all the safety precautions & procedures are followed.
• During the disassembly and/or assembly process, please handle with care as there may be chassis components with
sharp edges.
• Avoid touching heatsinks due to its high temperature after prolong use. (See caution as described below)
• During disassembly and assembly, please ensure proper service tools, equipments or jigs is being used.
• During replacement of component parts, please refer to the section of “Replacement Parts List” as described in the
service manual.
• Select items from the following indexes when disassembly or replacement are required.
•
Disassembly of Top Cabinet Assembly
•
Disassembly of Headphone P.C.B.
•
Disassembly of iPod P.C.B.
•
Disassembly of iPod Lid
•
Disassembly of Front Panel Assembly
•
Disassembly of USB P.C.B.
•
Disassembly of Panel P.C.B.
•
Disassembly of FL Window
•
Disassembly of Centre Ornament
•
Disassembly of CD Lid
•
Disassembly of CD Mechanism Unit (DLS6C)
•
Disassembly of Power P.C.B.
•
Replacement of Power Amp IC (IC5101)
•
Disassembly of Main P.C.B.
•
Disassembly of Fan Unit
•
Disassembly of Transformer P.C.B.
•
Replacement of Transistor (Q5901)
•
Disassembly of CD Servo P.C.B.
Summary of Contents for SA-PM42EP
