
55
11.2. Checking & Repairing Panel
P.C.B.
Step 1 :
Remove Top Cabinet Assembly.
Step 2 :
Remove Front Panel Assembly.
Step 3 :
Remove USB P.C.B..
Step 4 :
Remove Panel P.C.B..
Step 5 :
Place a support block underneath the Top Cabinet
Assembly.
Step 6 :
Connect 14P FFC at connector (CN350) on Main
P.C.B..
Step 7 :
Connect 5P cable at connector (CN902) on Main
P.C.B..
Step 8 :
Lay an insulating material on Panel P.C.B..
Step 9 :
Attach extension cable REEX1022 (11P FFC from
CN901 on Main P.C.B. to CN900 on Panel P.C.B.).
Step 10 :
Connect 4P cable at connector (CN5902) on Trans-
former P.C.B..
Step 11 :
Connect 22P FFC at connector (CN380) on Main
P.C.B..
Step 12 :
Check & repair Panel P.C.B. according to the diagram
shown.
Summary of Contents for SA-PM42EP
