Panasonic SA-HT885WEG, Service Manual

Page: 3 / 89

RGB video output:
R output level: 0.7 Vp-p (75 Ω )
G output level: 0.7 Vp-p (75
Ω
)
B output level: 0.7 Vp-p (75 Ω )
Terminal Scart jack (1 system)
Power consumption in standby mode:
approx 0.7W
Note:
1. Specifications are subject to change without notice.
Mass and dimensions are approximate.
2. Total harmonic distortion is measured by the digital spectrum
analyzer.
Solder:
This model uses lead free solder (PbF).
1 Use of Active Subwoofer 5
1.1. Checking Player when Active Subwoofer is not used 5
2 Safety Precautions 6
2.1. GENERAL GUIDELINES 6
3 Prevention of Electro Static Discharge (ESD) to
Electrostatically Sensitive (ES) Devices 6
4 Before Repair and Adjustment (Using Active Subwoofer) 7
5 Protection Circuitry 7
6 Precaution of Laser Diode 8
7 About Lead Free Solder (PbF) 8
8 General Description 9
8.1. Operating instructions 9
8.2. Disc information 10
8.3. Using of Receiver Unit (SH-FX50) - Optional 12
8.4. About HighMAT 13
9 Accessories 18
10 Handling Precautions for Optical Pickup Unit 19
10.1. Cautions to Be Taken in Handling the Optical Pickup Unit
19
10.2. Cautions to Be Taken When Replacing the Optical Pickup
19
10.3. Grounding for electrostatic breakdown prevention 19
11 Disassembly and Main Component Replacement Procedure
21
11.1. Disassembly Procedure 21
11.2. Main Components and P.C.B. Locations. 22
11.3. Disassembling the Top Cabinet 23
11.4. Disassembling the Lid assembly (When taking out disc
manually) 23
11.5. Disassembling the Front Panel 24
11.6. Disassembling the FL P.C.B., Volume P.C.B. 24
11.7. Disassembling the DVD mechanism Unit 24
11.8. Disassembling the DVD Module P.C.B. 25
11.9. Disassembling the Rear panel 25
11.10. Disassembling the Scart P.C.B. 25
11.11. Disassembling Main P.C.B. 25
11.12. Service Position 26
12 Assembling and disassembling the DVD mechanism Unit 27
12.1. Disassembly Procedure 27
12.2. Traverse Unit 27
12.3. Tray Unit 28
12.4. Loading section 29
CONTENTS
Page Page
3
SA-HT885WEG