Panasonic SA-HT885WEG Service Manual Download Page 28

Page: 28 / 89

1. Slide the guide tray unit while pressing the stopper in the

arrow direction, and remove the guide tray unit.

2. Raise the loading unit.
3. Slide the lever in the arrow direction till it stops and pull the

tray out.

4. Spread the tabs at the both sides and pull the tray out. (The

tray slides a little forward and stops.)

5. Remove the drive arm concave phase from the tray slider

and tray.

(Assembling the tray unit)

1. Insert a part of the tray into the unit sliding over the

groove on the mechanical chassis unit.

2. Insert the tray to the point before the tab of the

mechanical chassis unit.

3. Hook the drive arm concave phase over the tray and the

tray slider.

4. Press in the tray.
5. Make sure that the tray and the drive arm move

smoothly.

12.3. Tray Unit

SA-HT885WEG

Summary of Contents for SA-HT885WEG


























































































Search results

Summary of Contents for SA-HT885WEG

Reviews:

Related manuals for SA-HT885WEG

Brands by name

Popular brands

Panasonic SA-HT885WEG, Service Manual

Search results

Summary of Contents for SA-HT885WEG

Reviews:

Related manuals for SA-HT885WEG

Brands by name

Popular brands