Panasonic SA-HT800VP, Service Manual

Page: 26 / 210

Section Code Meaning Note
Disc code F103 Illegal Highlight Position Possibility of illegal disc when highlight
is displayed
Decoder
related F220 Y level adjustment failure Brightness signal level adjustment
cannot be properly operated
F221 C level adjustment failure Color signal level adjustment cannot
properly operated
II C error F4FF Compulsory initialization failure (time out)
DSC related F500 DSC error DSC stops due to servo failure. (
focus failure, etc.)
F501 DSC not ready Communication failure between
system computer(No communication
because DSC does not move)
F502 DSC time out failure See F500.
F503 DSC communication failure Communication failure (Result failure
occurs after communication command
transmitted.)
F504 Data slice offset adjustment failure Not in use. (FEP error)
F505 DSC Attention Error See F500.
F506 Invalid media Disc is placed upside down; TOC
unreadable or invalid disc is inserted.
ODC related F600 Control information unattainable due to
demodulation error
Operation stops because navigation
data cannot be obtained due to
demodulation system failure.
F601 Unknown sector ID requested Operation stops because access
illegal ID data is requested.
F602 LEAD-IN unattainable due to demodulation
error Unable to read LEAD IN data
F603 KEYDET unattainable due to
demodulation error Unable to obtain CSS data
F610 ODC failure No permission of command issue
F611 6626 QCODE don't read ERROR Unable to obtain seek address at
system
F612 No CRC OK during a certain time of
duration Unable to obtain ID data at DVD system
F630 No response to KEY DET makeshift (Internal use)
F631 CPPM KEY DET unavailable to FILE end
terminal CPPM fail system cannot be read
scratch.
F632 CPPM KEY DET unavailable Revoke or altered.
26