26
RQT8103
O
th
e
r s
p
eake
r s
e
tu
p
o
p
ti
o
n
s
Other speaker setup options
∫
Attaching to a wall
You can attach all of the speakers to a wall.
1
Drive a screw (not included) into the wall.
2
Fit the speaker securely onto the screw(s) with the hole(s).
≥
The wall or pillar on which the speakers are to be attached should be capable of supporting 10 k
g
per screw. Consult a qualified building
contractor when attaching the speakers to a wall. Improper attachment may result in damage to the wall and speakers.
∫
Fitting speaker stands
(not included)
Ensure the stands meet these conditions before purchasing them.
Note the diameter and length of the screws and the distance between screws as shown in the diagram.
≥
The stands must be able to support over 10 k
g
.
≥
The stands must be stable even if the speakers are in a high position.
30–35 mm
‰
7.5–9.4 mm
4.0–7.0 mm
Wall or pillar
‰
3.0–4.0 mm
90 mm
Front and surround speakers
In this position, the
speaker will likely
fall if moved to the
left or right.
Move the speaker
so that the screw is
in this position.
Center speaker
Speaker stand
(not included)
Plate thickness plus 7 mm to 10 mm
Front and surround speakers
e.g.
Attach the stands to these
metal screw holes.
60 mm
5 mm, pitch 0.8 mm
HT330 En.book Page 26 Friday, April 29, 2005 9:39 AM
