38
39
12.3.9. AC Inlet Unit
1.Cut the cable tie.
2.Detach the lead wires fixed at hooking part.
3.Remove the Ferrite Core from the cable.
4.Press tab (A) on the AC cord connector simultaneously
in the direction of arrows to pull the AC cord out from the
Back Panel.
12.3.8. Mechanism Unit
1.Remove the 2 screws (A) then remove the Mechanism
Unit.
(When assembling, first set the Mechanism unit to tabs (A)
then tighten the 2 screws (A).
Mechanism Unit
Tab (A)
Screw (A)
AC Inlet Unit
Tab (A)
39
12.3.8. Mechanism Unit
1. Remove the 2 screws (A) then remove the Mechanism
Unit.
(When assembling, first set the Mechanism unit to
tabs (A) then tighten the 2 screws (A).)
12.3.9. AC Inlet Unit
1. Cut the cable tie.
2. Detach the lead wires fixed at hooking part.
3. Remove the Ferrite Core from the cable.
4. Unlock the 2 tabs (A) and remove the AC Inlet Unit.
Cable tie
Hooking part
Caution:
If the Digital P.C.B. Unit and/or Mechanism Unit is
exchanged,the drive adjustment is required because
of the adjustment data is stored in Digital P.C.B.Unit.
Perform the driver adjustment accordance with "13.1.
When Replacing the Mechanism Unit and/or Digital
P.C.B.Unit".
