9 Replacement of Traverse Unit
9.1.
Disassembly of Traverse Unit
• Refer to “Disassembly of CD Mechanism Unit (BRS1C)”.
Caution: Refer to “2.4 Handling Precaution for Traverse
Unit” to prevent static damage to the Optical Pickup Unit.
Note:
1. When the optical pickup unit is defective, the overall
traverse unit needs replacement.
2. Please note that appropriate actions need to be taken to
prevent static damage.
3. Ensure that the circuit is open before assembly BRS1 to
the main set.
Step 1:
Use a pin to slide the Traverse Slide Plate until it come
to a stop.
Step 2:
Slide the tray out fully.
Step 3:
Release the catches & remove the tray.
53
Summary of Contents for SA-AKX12
