Step 1
Remove 2 screws fixed to the Power Amplifier IC and 1
screw to Voltage Regulator.
Step 2
Break the joint with a metal cutter as shown below.
Step 1
Remove 3 screws, disconnect connector CN5950.
Step 3
Unsolder the terminals of Power Amp IC, transistor and
replace the components.
Step 4
Fix back the cut portion with a screw as shown.
·
Replacement of the Power Amplifier IC/ Voltage Regulator
10.10. Disassembly of Transformer P.C.B. & Voltage Selector
·
Follow the (Step 1) - (Step 2) of Item 10.3 - Disassembly of Top Cabinet
·
Follow the (Step 1) - (Step 6) of Item 10.4 - Disassembly of CD Lid
·
Follow the (Step 1) of Item 10.5 - Disassembly of Rear Panel
·
Follow the (Step 1) - (Step 3) of Item 10.6 - Disassembly of CD Mechanism Unit
18
SA-AK631GCP
Summary of Contents for SA-AK631GCP
