Panasonic SA-AK570GCP Servise Manual Download Page 9 | Manualshive

Page: 9 / 134

background image

5 About Lead Free Solder (PbF)

5.1. Service caution based on legal restrictions

5.1.1. General description about Lead Free Solder (PbF)

The lead free solder has been used in the mounting process of all electrical components on the printed circuit boards used for this
equipment in considering the globally environmental conservation.

The normal solder is the alloy of tin (Sn) and lead (Pb). On the other hand, the lead free solder is the alloy mainly consists of tin
(Sn), silver (Ag) and Copper (Cu), and the melting point of the lead free solder is higher approx.30 degrees C (86°F) more than that
of the normal solder.

Definition of PCB Lead Free Solder being used

The letter of “PbF” is printed either foil side or components side on the PCB using the lead free solder.
(See right figure)

Service caution for repair work using Lead Free Solder (PbF)

•

The lead free solder has to be used when repairing the equipment for which the lead free solder is used.

(Definition: The letter of “PbF” is printed on the PCB using the lead free solder.)

•

To put lead free solder, it should be well molten and mixed with the original lead free solder.

•

Remove the remaining lead free solder on the PCB cleanly for soldering of the new IC.

•

Since the melting point of the lead free solder is higher than that of the normal lead solder, it takes the longer time to melt
the lead free solder.

•

Use the soldering iron (more than 70W) equipped with the temperature control after setting the temperature at 350±30
degrees C (662±86°F).

Recommended Lead Free Solder (Service Parts Route.)

•

The following 3 types of lead free solder are available through the service parts route.

RFKZ03D01K-----------(0.3mm 100g Reel)

RFKZ06D01K-----------(0.6mm 100g Reel)

RFKZ10D01K-----------(1.0mm 100g Reel)

Note

* Ingredient: Tin (Sn), 96.5%, Silver (Ag) 3.0%, Copper (Cu) 0.5%, Cobalt (Co) / Germanium (Ge) 0.1 to 0.3%

9

SA-AK570PL / SA-AK570GCP

«
...
7
8
9
10
11
...
»

Summary of Contents for SA-AK570GCP







































































































































Reviews:

No comments

Related manuals for SA-AK570GCP

Brand: M86 Security Pages: 86

Brand: GDC Pages: 40

Brand: Abicor Binzel Pages: 8

Brand: Geberit Pages: 49

Brand: Paradox Pages: 2

Digiplex EVO DGP2-640

Brand: Paradox Pages: 24

Brand: Q Acoustics Pages: 19

Brand: Salus Pages: 2

Brand: uAvionix Pages: 4

Brand: Wavetronix Pages: 4

Brand: X-10 Pages: 32

Brand: Waters Pages: 116

Subwoofer KHT2005.2

Brand: KEF Pages: 2

Brand: KEF Pages: 7

Brand: KEF Pages: 4

V665 - RX AV Receiver

Brand: Yamaha Pages: 2

Brand: Teac Pages: 14

Brand: Lexus Pages: 393

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands