Panasonic S-LINK V, User Manual

Page: 159 / 182

159
Chapter 4
List of Models
List of connectors
Designation Model No. Description
Hook-up connector SL-J1A
This connector enables a ‘T’ - branch of the exclusive 4-core flat cable.
For 0.5mm
2
to 0.5mm
2
(Gray)
Hook-up connector for cable
extension
SL-J3A
Used for extension of the exclusive 4-core flat cable.
For 0.5mm
2
to 0.5mm
2
(Black)
Hook-up connector for cable
end
SL-JK
If the snap male connector ( SL-CP □) is used together, this hook-up connector
( SL-JK ) enables connection of the I/O unit to the end of the exclusive 4-core flat
cable (0.5mm
2
). (Light blue)
Hook-up connector for 'T' -
branch
SL-JK1
If the snap male connector ( SL-CP □) is used together, this hook-up connector
( SL-JK1 ) enables connection of the I/O unit to any point of the exclusive 4-core flat
cable (0.5mm
2
). (Blue)
Snap male connector
SL-CP1
For 0.08 to 0.2mm
2
Lead wire diameter: ø0.7 to ø1.2mm
(White)
Used for connection of the I/O device to the
SL-VT□J / SL-VTP□J connector I/O unit or con-
nection of the S-LINK V I/O unit to the SL-JK /
SL-JK1 hook-up connector.
SL-CP2
For 0.3mm
2
Lead wire diameter: ø1.1 to ø1.6mm
(Black)
SL-CP3
For 0.5mm
2
Lead wire diameter: ø1.7 to ø2.5mm
(Bluish green)
Snap female connector
SL-CJ1
For 0.08 to 0.2mm
2
Lead wire diameter: ø0.7 to ø1.2mm
(White)
Used for connection to the SL-CP□ snap male
connector.
SL-CJ2
For 0.3mm
2
Lead wire diameter: ø1.1 to ø1.6mm
(Black)
We can provide connectors in units of 10-connector sets.
If you need connectors, please let us know how many sets you need (1 set: 10 pcs.)
NOTE
Handy monitor
Designation Model No. Description
Handy monitor SL-VHM1
This monitor can be connected to any point of the signal transmission line, and en-
ables monitoring of the I/O conditions in units of 16 points.
In addition, this monitor is incorporated with the S-LINK V controller functions. For
this reason, even in the middle of installation work, this monitor can carry out I/O
check for a divided conveyor, or the like, without activating the S-LINK V controller.
Address setting remote controller
Designation Model No. Description
Address setting remote
controller
SL-VAR1
This remote controller is designed specifically to select the SL-VPK0□ address and
lamp color and to change its address offset.
It can also send and receive all settings at once using infrared communications.