background image

10

Internal Cleaning Function

„

 Internal Cleaning Operation

When cooling or dry operation stopped, internal drying and nanoe™ X circulation airflow is activated in order to suppress the mold 
proliferation inside the unit (airflow passage, fan, heat exchanger). According to the installation environment or operating hours, 
mold proliferation or inhibition of mold growth will be changed.

z

z

Operating conditions and operating hours 

 

Operates in cooling or dry mode for more than 5 minutes.

 

When finished, the internal cleaning operation is started.

 

Drives for about Max 75 minutes.

z

z

The figure at right shows the display during the internal 

cleaning operation.

„

  If you wish to resume operating during internal cleaning, 

press

 / 

.

„

z

z

To stop the internal cleaning operation 

 

Press

 / 

.

zzz

When the internal cleaning operation finished and stopped, 
the remote control display shows at right.

NOTES:

z

z

Internal cleaning function is not possible to use any remote controller other than that of nanoe™ X function.

z

z

When connected to the remote controller which is adaptable to the nanoe™ X function, the internal cleaning function is set to 
work automatically. If you wish to set to OFF, refer to the operating instructions for the remote controller which is adaptable to 
the nanoe™ X function.

z

z

In case that the operation time of the air conditioner is less than 5 minutes, the internal cleaning operation cannot be 
performed.

z

z

While the internal cleaning operation is running, the indoor temperature may occasionally increase.

Internal Cleaning Operation

Internal drying of inside unit

Fan rotation and internal dehumidifying

nanoe™ X cycle of inside unit

Fan rotation and nanoe™ X internal circulation

nanoe™ X Function

20:30 (THU)

START

[ ]

room A

CZ-RTC5B

CZ-RTC6*

20:30 (THU)

START

[ ]

Cleaning the inside of air 

conditioner with              .

Press            to finish.

[

]

room A

Press          

to finish

[

]

01_330422_EN.indb   10

2021/3/8   9:16:40

Summary of Contents for S-22MU2E5B



















Reviews: