39
English
T
roubleshooting
Diagnostic display
Abnormality/Protection control
Indoor
E01
Remote Controller Error In Receiving Signal from Indoor Unit
E02
Remote Controller Error In Transmitting Signal To Indoor Unit
E03
Indoor Unit Error In Receiving Signal from Remote Controller
E04
Indoor unit not receiving signal from the outdoor unit
E08
Duplication of Indoor Unit Address Setting
E09
Duplication of Main Remote Controller Setting
E14
Duplication of Main Unit in Group Control
E15
The Total Capacity of Indoor Units is Too Low
E16
The Total Capacity of Indoor Units is Too High
E18
Group Control Main Indoor Unit Error In Receiving Signal From Sub Indoor Unit
F01
Indoor Heat Exchanger Temp. sensor (E1) trouble
F02
Indoor Heat Exchanger Temp. sensor (E2) trouble
F10
Indoor Air temperature sensor (TA) trouble
F29
Indoor Unit PCB EEPROM Abnormal
L02
Indoor & Outdoor Unit Type Mismatch
L03
Duplication of Main Indoor Unit Address Setting in Group Control
L07
Group Control Wiring is Connected to Individual Control Indoor Unit
L08
Indoor Unit Address is Not Set
L09
Indoor Unit Capacity is Not Set
P01 or P12
Indoor fan motor abnormality
P09
Faulty wiring connections of indoor unit panel (cassette)
P10
Indoor Float switch abnormal
P11
Indoor Drain pump abnormal
P16
Outdoor compressor overcurrent alarm
P29
Outdoor compressor start failure alarm
P31
Indoor Unit Group Control Abnormal
* Some error code may not be applicable to your model. Consult an authorised dealer for clari
fi
cation.
ACXF55-32051_SS1021-1.indb 39
ACXF55-32051_SS1021-1.indb 39
13/10/2021 6:32:29 PM
13/10/2021 6:32:29 PM