Operation
12
Using Bluetooth
®
In the power-off state, press and hold [
Í
/I ( )] of this
unit for approx. 3 seconds until the power/pairing LED
(blue) blinks.
• A beep will sound, and the power/pairing LED (blue) will blink slowly.
• The power cannot be turned on when the detachable cord (supplied) is
connected.
∫
To turn the power off
Press and hold [
Í
/I ( )] for approximately 3 seconds. An English
guidance message will be heard, and the power will be turned off.
• It is possible to switch the audio guidance between English and
French. (
Note
• Battery power is consumed even if the unit is powered off when the [NC] switch is ON.
• If the unit is not connected to a Bluetooth
®
device, an English guidance message will be heard and turn off the unit
automatically approximately 5 minutes after you have stopped using it. (
• It is possible to switch the audio guidance between English and French. (
Turning the power on/off
Power/pairing
LED
[
Í
/I (
)]
Right (R) side
