ZVOLTZ PRO SPORT WIRELESS EARBUDS OVERVIEW GUIDE
NOTE: The Type-C Charging Port is ONLY for
charging the Charging Case. While the USB
Type-A Port is ONLY for charging OTHER devices.
What’s In The Box?
Activating The Earbuds
Pairing The Earbuds
1. Take out the Earbuds.
2. Pull the protective adhesive film
off of the Earbuds.
3. Please put Earbuds back into the
Charging Case and CLOSE it for at
least 1 min. and then begin use.
PAIR
1. Open the Charging Case to automatically power ON the earbuds.
2. White and Red LED Indicator on the earbuds will flash and a voice prompt will
state,”Pairing”.
3. Go to Settings. Go to Bluetooth. Tap”ZVOLTZ”.
4. A voice prompt will state,”Connected” signaling the processis complete.
What if you cannot find
“ZVOLTZ”
in your Bluetooth page?
Reason 1:
Earbuds have paired to another device.
Solution:
Disconnect the Earbuds by turning Off the Bluetooth on the mistaken connected devices, then pair the Earbuds to your preferred device.
Reason 2:
The Ear buds has reached 0% battery life.
Solution:
Place both Earbuds back into the Charging case. Allow the Earbuds to recharge for around 5 mins. If the Charging Case has run out of
battery, plug it into a USB power source with the Earbuds still in side. (Type-C Cable provided).
Reason 3:
Earbuds are completely OFF.
Solution:
You may have accidentally manually turned off the Earbuds, Please press and hold the MFB buttons for 3-4 seconds to turn on the Earbuds.
