Not for use in cooking area. (Fig. A)
The special-purpose or dedicated parts, such as mounting fixtures,
must be used if such parts are provided.
For general ventilating use only. Do not use to exhaust hazardous or
explosive materials and vapors.
Provide make up air for proper ventilation.
Do not connect multiple units in parallel. If two or more units are connected to one switch in parallel, the units
may not function.
Do not install the unit where ducts are configured as shown in below:
Squeezed duct
Successive bending
Excessive bending
Bend close to duct adaptor
Adaptor
Floor
45
°
45°
Cooking
equipment
Fig. A
(Cooking area)
Do not install above or
inside this area
Part name
Appearance
Quantity
1
3
Installation
instructions/
Warranty
sheet
Long screw
(ST4.2X20)
Part name
Appearance
Quantity
Grille
1
GENERAL SAFETY INFORMATION (CONTINUED)
DESCRIPTION
This product is listed by UL under UL file No. E78414.
This product uses a sirocco fan driven by a capacitor motor. The motor is designed to have an extended service life
with reduced energy consumption. It also incorporates a thermal-cutoff for safety. The Grille Assembly covering the Fan
Body is a spring-loaded quick removal type. A damper for preventing air counter flow is provided. The blower uses a
high-capacity sirocco fan developed to reduce the noise level. This product has two speeds: “I” (Standard) is low airflow
and “II” (Boost) is high airflow.
UNPACKING
Unpack and carefully remove the unit from carton. Refer to the Supplied Accessories list to verify that all parts are
present.
SUPPLIED ACCESSORIES
3
Do not kink the supply wiring.
NOTICE
