9
TQ
B
J20
29
Using the batteries (not
supplied)
Use alkaline or manganese batteries.
Install the batteries so that the poles (+
and –) align with those in the unit.
This unit will use the batteries as the
power source when you disconnect the
AC mains lead. The battery indicator
will light up.
The battery indicator shows the battery
levels.
Caution!
Be careful when adjusting the antenna
or in handling the unit, always keep the
antenna away from your face to avoid
an injury.
Note:
When the battery indicator
“
”
begins
flashing, replace all 3 of the batteries.
Getting started
1
Extend the antenna.
2
Press [
1
] to switch on the unit.
The first time you switch on the unit, it
will enter DAB mode and automatically
scan for stations. It sets the time and
date (if data is available) and starts
playing the first station it finds.
Note:
In standby mode, the unit shows the time
and date (only when the unit is powered by
AC).
DAB/DAB+
DAB (Digital Audio Broadcasting) is a
procedure of broadcasting the radio
digitally. It gives less interference and
better sound quality.
This unit supports DAB in “BAND III”
bands.
1
2
3
R6/LR6, AA
1
2
Number of stations found
D20BT_en_gn.fm Page 9 Monday, June 12, 2017 1:56 PM
Rev 3
offset printing
