10
TQ
BJ
202
9
DAB operation
The first time you enter DAB mode, or if
the station list is empty, the unit will
start the full scan and memorise the
stations.
You can perform the full scan
procedure when there is a new station
or a station becomes available.
1
Press [SOURCE] to select “DAB”.
2
Press [MENU] to select “Full scan”
and then press [ENTER] to start
full scan.
To cancel, press [MENU].
█
Remove unavailable listed
stations
This unit indicates those stations that
are closed or no longer available with a
question mark in front of the station
name. You can remove these stations
from the station list.
1
Press [MENU] and then press
[
TUNE/SELECT
] to select
“Prune”.
2
Press [ENTER].
3
Press [
TUNE/SELECT
] to
select “Yes” and then press
[ENTER].
To cancel, select “No”.
Listening to a station
1
Press [
TUNE/SELECT
] to
select a station from the station
list.
2
Press [ENTER] to tune to the
selected station.
Note:
“
” indicates a secondary service station.
Secondary service stations are always
listed next to their primary station in the
station list.
Presetting stations
You can preset up to 5 stations into the
direct preset buttons.
1
While listening to a station, press
and hold the desired direct preset
button ([1] to [5]).
Example: press and hold [2] to store
current station into preset
2.
2
Press [ENTER] to preset the
station.
█
Listening to a preset station
Press the direct preset button ([1] to
[5]) to listen to the preset station.
D20BT_en_gn.fm Page 10 Monday, June 12, 2017 1:56 PM
Rev 3
offset printing
