14
TQ
BJ
202
9
System settings
█
To view the System menu
When in DAB or Bluetooth mode
1
Press [MENU].
2
Press [
TUNE/SELECT
] to
select “System” and then press
[ENTER].
When in FM mode
Press [MENU].
█
To navigate around the menu
Press [
TUNE/SELECT
] to select
an item or option. Press [ENTER] to
confirm.
Example: Backlight setting displays
Indicates current setting
Alarm
The Alarm Wizard is shown.
•
Alarm:
Alarm Off, Alarm On
Select “Alarm On” to switch on the alarm.
•
On time:
Set the hours and minutes of start time.
•
Source:
Buzzer, DAB, FM
Set the audio source.
If FM or DAB is set, select the last station you tuned in to (“Last
listened”) or a preset station as the audio source.
• Set the volume
The alarm starts at a low volume and increases gradually to the
preset level.
“ ” is shown after you set the alarm.
Note:
• The alarm does not work when the unit is powered by batteries.
• Check that the date and time are set correctly, or else the alarm may not
work as desired.
• The alarm will come on at the set time every day for a duration of
59 minutes. Press any button or turn any knob to stop the alarm.
• You need to set the alarm again every time you disconnect and connect
the AC power or after you replace the batteries.
Sleep
The sleep timer switches off the unit after the set time (in minutes).
Sleep Off, 30 minutes, 60 minutes, 90 minutes, 120 minutes
“
” is shown after you set the timer.
To cancel, select “Sleep Off”.
Equaliser
Heavy, Soft, Clear, Vocal, Flat
“
” is shown after you select the effect.
To cancel, select “Flat”.
D20BT_en_gn.fm Page 14 Monday, June 12, 2017 1:56 PM
Rev 3
offset printing
