6.2.9. T Loading Arm Unit and S Loading
Arm Unit
Fig. J7-1
6.2.9.1. Reassembly Notes
1. Alignment of T Loading Arm Unit and S Loading Arm
Unit
a. Install the S Loading Arm Unit onto the chassis.
b. Install the T Loading Arm Unit so that the hole on T
Loading Arm Unit is aligned with the hole on S Loading
Arm Unit.
c.
Confirm that the holes on the S & T Loading Arm Unit
are Through Holes with hole on chassis.
Fig. J7-2
6.2.10. T Brake Unit, Tension Control Arm
Unit, T Reel Table, S Reel Table,
and Tension Arm Unit
Fig. J8-1
Note:
1. Only For early products; the Assist Spring is used.
When servicing the Assist Spring or the Tension Arm Unit,
replace only the Tension Arm Unit with a new one and
remove the Assist Spring.
6.2.10.1. Reassembly Notes
1. How to distinguish between S Reel Table and T Reel
Table
Fig. J8-2
35
PVQ-1310 / PV-C1320 / PV-C1330W / VV-1300 / VV-1310W / PV-C1340 / PV-C1350W / PV-C2010 / PV-C2020 / PV-C2030W / VV-2000 / PV-C2060