Panasonic PV-DV103-K Operating Instructions Manual Download

Page: 46 / 70

Editing Features

3, 4, 5

PAUSE

3, 4

PLAY

STOP

High quality digital-to-digital copying can be
accomplished if both Palmcorders
incorporate the DV Input/Output (i.LINK)
Connector (DV Interface Cable (i.LINK) is
not supplied).

Insert a pre-recorded tape

into the

source (playing) Palmcorder,

and set

POWER to VCR.

Insert a blank tape with the record
tab

closed into the target (recording)

Palmcorder

and set POWER to VCR.

Press (PLAY)

on the source

Palmcorder. When the tape reaches
the point you want to start dubbing,

press (PAUSE)

Hold down (REC) and press

(PLAY)

on the target (recording)

Palmcorder or on the remote control
(optional).

Press (PAUSE)

to pause the tape at

the starting point of the dub.

Simultaneously, press (PAUSE)

both units to begin dubbing.

Press (STOP)

on the recording

unit, and then

press (STOP)

on the

playing unit to end dubbing.

• When two Palmcorders are used for

dubbing, it is recommended that the
Remote Control (optional) VCR1 or VCR2
setting be used to avoid improper-
operation.

CAUTION:

Unauthorized exchanging and/or
copying of copyrighted recordings may
be copyright infringement.

Source (Playing)
Palmcorder

Recording
Palmcorder

DV Interface
Cable (i.LINK)
(optional)

DV Input/Output
(i.LINK) Connector

Copying from Digital
Equipment (dubbing)

Note

Before you begin

• Connect both Palmcorders to their

power sources.

• Connect the two Palmcorders using the

DV Interface Cable (i.LINK)
(4-pin to 4-pin).

• Turn both Palmcorders ON.

REC

3, 4

PLAY

REC

3, 4, 5

PAUSE

STOP

DV103-K.p43-46.p65

2003/06/11, 13:19

Summary of Contents for PV-DV103-K







































































Search results

Summary of Contents for PV-DV103-K

Reviews:

Related manuals for PV-DV103-K

Brands by name

Popular brands

Panasonic PV-DV103-K, Operating Instructions Manual

Search results

Summary of Contents for PV-DV103-K

Reviews:

Related manuals for PV-DV103-K

Brands by name

Popular brands