22
3
Tuner setting
This DVD/VCR is equipped with a channel memory feature which allows channels to skip up or down to
the next channel set into memory, skipping over unwanted channels. Before selecting channels, they
must be programmed into the DVD/VCR’s memory. In addition to normal VHF and UHF channels, this DVD/
VCR can receive up to 113 Cable TV channels. To use this DVD/VCR with an antenna, set the TV/CABLE
menu option to the TV mode. When shipped from the factory, this menu option is in the CABLE mode.
Press
VCR MENU
. The VCR menu screen will appear. Press
SET +
or
–
to select “CH SETUP”, then press
ENTER
.
Then press
ENTER
to select the
TV or CABLE mode. The arrow
indicates the selected mode.
1
2
Press
SET +
or
–
to select the
“TV/CABLE” option.
4
Press
VCR MENU
until the menu screen is cleared.
TV
- VHF/UHF channels
CABLE - Cable TV channels
2
Setting channels automatically
The VCR can receive a maximum of 181 channels by
presetting the channels into memory.
Then press
ENTER
.
The auto tuning will start. The
channel display will count up and
when finished, the screen returns
to normal.
1
Repeat above step
1
and press
SET +
or
–
to select “AUTO CH
MEMORY”.
TV/CABLE selectiontion
Turn ON the TV and set to the video input mode.
Press
VCR/DVD
to select the VCR mode. (The VCR indicator
will light.)
Preparation:
•
•
〈
+/-/ENTER/MENU
〉
CH SETUP
TV CABLE
AUTO CH MEMORY
ADD/DELETE
〈
+/-/ENTER/MENU
〉
CH SETUP
TV CABLE
AUTO CH MEMORY
ADD/DELETE
〈
+/-/ENTER/MENU
〉
CH SETUP
TV CABLE
AUTO CH MEMORY
ADD/DELETE
CH 002
NOTE:
You can’t select “CH SETUP” if you set
the channel to “LINE 1” or “LINE 2”.
2D81601A (22-27)
29/7/04, 15:39
22
