B
asi
c Op
eration
Switching the projector on/off
E
NGLISH - 20
J
By control panel operation
Make sure the
CONTROL PANEL
setting in
OPTION
menu is set to
VALID
.
1. Press the
POWER
button.
The confirmation screen will be displayed.
Without any operation for 10 seconds or press any
button other than the
POWER
button, the
confirmation screen will go off and return to the
projection.
2. Press the
POWER
button again in 10 seconds.
3. The
POWER
indicator will flash in orange.
The projector is cooling the lamp.
4. The
POWER
and
POWER LOCK
indicator switch
to red.
J
By remote control operation
1. Press the
POWER
button.
The confirmation screen will be displayed.
Without any operation for 10 seconds or press any
button other than the
POWER
button, the
confirmation screen will go off and return to the
projection.
2. Press the
POWER
button again in 10 seconds.
3. The
POWER
indicator will flash in orange.
The projector is cooling the lamp.
4. The
POWER
and
POWER LOCK
indicator light
red.
J
By direct power off function
You can switch off the projector by disconnecting
the power cord. See “Direct power off function” on
page 18.
Switching off the projector
FUNCTION
MENU
RETURN
INPUT SELECT
RELEASE
RELEASE
(4)
(
4
)
(1 ‑ 3)
(3 - 4)
(4)
(1 - 2)
NOTE:
• You can switch off the power without displaying the confirmation screen by pressing the
POWER
button for longer than
0.5 second.
• When the internal cooling fan is operating, some, operational sound may be heard. The loudness of the operational sound
depends on the external temperature.
• If the projector is switched on again while the internal cooling fan is still operating by the internal power supply, it may take
a while to start the projection.
• Operating the control panel buttons with covered hand, such as plastered or gloved hand, may result in fail.
