90
How to use network module (optional)
E-mail setting page
• This page allows the user to send mail to up to two mail addresses automatically.
Select “Enable” to use
the E-mail function.
Enter the IP address of
the E-mail server
(SMTP).
The user can enter the
location of, for example,
the installed projector
so that the recipient
may easily identify the
originator of the E-mail.
Enter the E-mail address
of the projector.
The user can modify the
minimum time interval of
temperature warning mail.
The default value is 60
minutes. In this case, the
user cannot send another
mail for 60 minutes after
sending previous
temperature warning mail
even the set warning
temperature is reached again.
The user can modify the
threshold temperature for
sending temperature
warning mail. If the
temperature rises above
the set value, control
sends temperature
warning mail.
Enter the E-mail address
of your desired recipient.
