Panasonic PT53WX54J - 53" PROJECTION TV HD, Service Manual

Page: 175 / 225

7. Press POWER on the remote control to display the service adjustment
modes menu, select adjustment by pressing the VOL right/left buttons
and CH up/down buttons on the remote and ACTION to enter the
adjustment.
Service mode menu
NOTE:
Some adjustments are available only in some modes (480i, 480p, 1080i); it is needed to apply the
format; For some adjustments is required to perform adjustment for each format; convergence
adjustment must be performed for 480i-p (same for interlace & progressive),ZOOM 480i and 1080i. A
1080i, 480p, 480i pattern can be obtained from Panasonic’s TU-DST51 set-top box DTV decoder.
19.2. Exiting the service mode:
This PTV goes out from service mode when it is unplugged or turned OFF. To exit the service mode,
turn the TV OFF or unplug the PTV from AC.
Other method
Press ACTION and POWER on the receiver simultaneously for at least 2 seconds.The receiver
momentarily shuts off; then comes back on tuned to channel 3 with a preset level of sound.Any
programmed channels, channels caption data and some others userdefined settings will be erased
when exited by pressing ACTION and POWER on receiver.
IMPORTANT NOTE
Always check that PTV exits the service mode
To check colors:
Press RECALL on the remote control when in service mode (red “CHK”
is displayed) to enter the purity field check mode.
Color check
72