Panasonic PT43LCX64 - MMD DIGITAL TUNER, Service Manual

Page: 66 / 117

-43-
REMOVAL OF THE MIRROR FROM THE BACK COVER
(PT-43LCX64/PT-50LCX64)
1. Remove the Screen Unit. Refer to Steps 1~4 in "REMOVAL OF THE SCREEN UNIT AND THE SPEAKER FROM THE DISPLAY."
2. 1) Remove the 2 Mirror Holder H and the 2 Mirror Holder V Unit by removing the 12 Screws (401).
2) Remove the Mirror from the top by releasing the Back Cover slots.
Note: Be careful that the Mirror does not fall down when removing.
Fig. D4-6-1
Reassembly Notes for Mirror:
Install the Mirror as following procedures:
1) Place the 3 sheets on the top and bottom edges of the Mirror.
Fig. D4-7-1
2) Hold the sheet portions of the Mirror, and insert the Mirror from the top into the Back Cover slots carefully.
When handling the Mirror, do not touch the Mirror surface.
3) Install the 2 Mirror Holder H and the 2 Mirror Holder V on the Mirror and tighten the 12 Screws (401).
Mirror surface
Sheet
Sheet
Sheet 60 mm 10 mm
20 mm 5 mm
60 mm 10 mm
20 mm 5 mm
10 mm ~ 15 mm
Sheet
Top edge
of Mirror
Bottom edge
of Mirror
Sheet
15 mm ~ 20 mm
10 mm ~ 15 mm
15 mm ~ 20 mm
Mirror surface
Sheet
Sheet
Sheet 0 mm ~ 5 mm
3 mm 5 mm
0 mm ~ 5 mm
3 mm 5 mm
10 mm ~ 15 mm
<Front View>
(PT-50LCX64)
<Front View>
(PT-43LCX64)
15 mm ~ 20 mm
10 mm ~ 15 mm
15 mm ~ 20 mm
401
401
401
401
Mirror Holder
V Unit
Mirror Holder H
Back Cover slots