Panasonic PT43LCX64 - MMD DIGITAL TUNER, Service Manual

Page: 48 / 117

-25-
REMOVAL OF THE PROJECTION UNIT FROM THE CABINET
1. Remove the Ballast C.B.A. and the TV/Tuner Unit. Refer to Steps 1~6 in "REMOVAL OF THE BALLAST C.B.A. AND THE TV/
TUNER UNIT FROM THE CABINET."
2. 1) Disconnect Connector P2502. Then, hook the P2502 cable to the pin.
2) Remove the 7 Screws (401) on the Projection Unit.
3) Lift up and slide the Projection Unit by releasing the 5 Guide Tabs.
Tips on removal of the Projection Unit:
First, slide the Projection Unit to the rear (approx. 1.5 inch (4 cm)). Then, lift up the front and the rear portions of the Projection
Unit by both hand to release the Guide Tabs. Then, slide out the Projection Unit.
Or, remove the Fan 3 Unit from the Projection Unit at first. Refer to Fig. D2-3.
Fig. D2-1
Lift up and slide the Projection Unit
by approx. 1.5 inch (4 cm).
Lift up the front portion.
Slide out the Projection Unit.
Slide
Tips on removal of the Projection Unit
Up
2
Up
Up Up
3
3 2
4
1
4
1
2
Lift up the rear portion. 3
<Side View>
401
Boss
P2502
Pin
Cover
Switch
C.B.A.
P2502
Cable
CAUTION:
Disconnect Connector P2502
and hook it as follows.