Error information page
When [Error (Detail)] or [Warning (Detail)] is displayed in the self-diagnosis display of the [Projector status] screen, click it to
display the error/warning details.
The projector may go into the standby status to protect the projector depending on the contents of the error.
f
1
Self-diagnosis result display
1
Displays the item check results.
[OK]:
Indicates that operation is normal.
[FAILED]:
Indicates that there is a problem.
[WARNING]:
Indicates that there is a warning.
[FAILED] items displayed when a problem occurs
r
Parameter
Description
[FAN]
Trouble has occurred in the fan or its drive circuit. Consult your dealer.
[FAN(INTAKE)]
Trouble has occurred in the intake fan.
[FAN(EXHAUST)]
Trouble has occurred in the exhaust fan.
[FAN(LAMP)]
Trouble has occurred in the lamp cooling fan.
[INTAKE AIR TEMPERATURE]
The air intake temperature is too high. The projector may be used in an operating
environment where the temperature is high, such as near a heating appliance.
[EXHAUST AIR TEMPERATURE]
The exhaust air temperature is high.
The air exhaust port may be blocked.
[OPTICS MODULE TEMPERATURE]
The temperature around the optics module inside the projector is high. The
projector may be used in an operating environment where the temperature is high,
such as near a heating appliance.
[LAMP REMAIN TIME]
The lamp runtime has exceeded the prescribed cumulative time, and it is now time
to replace the lamp.
[LAMP STATUS]
The lamp has failed to light.
Wait a short while for the lamp to cool off, and then turn on the power.
[APERTURE (CONTRAST-SHUTTER)]
Trouble has occurred in the contrast shutter circuitry. Consult your dealer.
[AIR FILTER]
There is too much dust accumulated in the air filter unit. Turning off the projector
and clean the air filter unit.
[Network status] page
Click [Status] → [Network status].
The current network setting status is displayed.
82 -
ENGLISH
Chapter 4 Settings - [NETWORK] menu
