[SECURITY] menu
On the menu screen, select [SECURITY] from the main menu, and select an item from the submenu.
Refer to "Navigating through the menu" (
Æ
page 45) for the operation of the menu screen.
When the projector is used for the first time Initial password: Press
f
awsq
awsq
in order, and press the <ENTER>
button.
After selecting the item, press
f
asqw
to set.
Attention
When you select the [SECURITY] menu and press the <ENTER> button, entering a password is required. Enter the preset
f
password and then continue operations of the [SECURITY] menu.
When the password has been changed previously, enter the changed password, and press the <ENTER> button.
f
Note
The entered password is displayed with "
f
" mark on the screen.
An error message is displayed on the screen when the entered password is incorrect. Re-enter the correct password.
f
[PASSWORD]
The [PASSWORD] screen is displayed when the power is turned on, [INITIALIZE ALL] is executed or [INITIALIZE] in the
[NETWORK] is executed.
When the entered password is incorrect, the operation will be restricted to the power standby <
v
/
b
>
button
on the control panel or the remote control.
Press
1)
as
to select [PASSWORD].
Press
2)
qw
to switch the item.
The items will switch each time you press the button.
f
[OFF]
Disables the security password entry.
[ON]
Enables the security password entry.
Note
The [PASSWORD] setting is set to [OFF] by the factory default.
f
Change the password periodically that is hard to guess.
f
The security password is enabled after setting [PASSWORD] to [ON] and turning the power off.
f
[PASSWORD CHANGE]
Change the security password.
Press
1)
as
to select [PASSWORD CHANGE].
Press the <ENTER> button.
2)
The [PASSWORD CHANGE] screen is displayed.
f
Press
3)
asqw
or number buttons (<1>-<6>) to set the password.
Up to eight button operations can be set.
f
Press the <ENTER> button.
4)
Re-enter the password for the confirmation.
5)
Press the <ENTER> button.
6)
ENGLISH
-
73
Chapter 4 Settings - [SECURITY] menu
