Setting up
Installation method
There are four ways to set up the projector. Set the [PROJECTOR SETUP] menu → [PROJECTION METHOD] (
x
page
67
)
depending on the installation location.
Mounting on the ceiling and projecting forward
Setting on a desk/floor and projecting from rear
(Using the translucent screen)
Menu item
Method
Menu item
Method
[PROJECTION METHOD]
[FRONT/CEILING]
[PROJECTION METHOD]
[REAR/DESK]
Mounting on the ceiling and projecting from rear
(Using the translucent screen)
Setting on a desk/floor and projecting forward
Menu item
Method
Menu item
Method
[PROJECTION METHOD]
[REAR/CEILING]
[PROJECTION METHOD]
[FRONT/DESK]
Parts for ceiling mount (Optional)
You can install the projector on the ceiling b
y using the optional ceiling mount bracket (ET-PKV100H: for high ceiling, ET-
PKV100S: for low ceiling), and the optional projector mount bracke
t ET-PKV101B.
Use only the ceiling mount brackets specified for this projector.
f
Refer to the Installation Instructions for the ceiling mount bracket when you install the bracket and the projector.
f
Attention
To ensure projector performance and security, installation of the ceiling mount bracket must be carried by your dealer or a
f
qualified technician.
26 -
ENGLISH
Chapter 2 Getting Started - Setting up
