Panasonic PT-VW545N Operating Instructions Manual Download Page 116

Page: 116 / 181

Web control function

Using Web control functions, you can perform the following operations from a computer.

Setting and adjustment of the projector

Displaying projector status

Sending E-mail messages when there is a problem with the projector

The projector supports “Crestron Connected

”, and the following application software of Crestron Electronics,

Inc. can be used.

RoomView Express

Fusion RV

RoomView Server Edition

Note

Communication with an E-mail server is required to use the E-mail function. Confi rm that the E-mail can be used beforehand.

“Crestron Connected

” is a system of Crestron Electronics, Inc. that collectively manages and controls devices on multiple systems

connected to a network using a computer.

For details of “Crestron Connected

”, refer to the website of Crestron Electronics, Inc. (English only)

URL http://www.crestron.com

To download “RoomView Express”, go to the website of Crestron Electronics, Inc. (English only)

URL http://www.crestron.com/getroomview

Computer that can be used for setting

A web browser is required to use the web control function. Confi rm that your web browser can be used

beforehand.

Compatible web browser

Windows

Internet Explorer 11.0

Mac OS

Safari 8.0/9.0/10.0

iOS

Safari (version equipped with iOS 9 and iOS 10)

Android

Google Chrome (version equipped with Android 4.4/5.0/5.1/6.0/7.0)

Note

You cannot operate the [Crestron Connected (TM)] page when using Microsoft Edge. Clicking the [Crestron Connected (TM)] button will

freeze the web browser.

Accessing from the web browser

1)  Start up the web browser on the computer.
2)  Enter the IP address set on the projector into the URL entry field of the web browser.
3)  Enter the user name and the password.

The factory default setting of the user name is user1 (user rights)/admin1 (administrator rights) and the

password is panasonic (single-byte characters in lower case).

116 -

ENGLISH

Chapter 5 Operation of Function - Web control function

Summary of Contents for PT-VW545N






















































































































































































Search results

Summary of Contents for PT-VW545N

Reviews:

Brands by name

Popular brands

Panasonic PT-VW545N, Operating Instructions Manual

Search results

Summary of Contents for PT-VW545N

Reviews:

Brands by name

Popular brands