Note
f
[DAYLIGHT VIEW] cannot be set to [AUTO] when the [PROJECTOR SETUP] menu → [PROJECTION METHOD] is set to
[REAR/DESK] or [REAR/CEILING].
f
The [AUTO] mode may not function properly if an object is placed on the top of the projector.
[DIGITAL CINEMA REALITY]
(Only for movie-based signal input)
You can improve the vertical resolution of 2-2 and 2-3 pull down video.
This function is available only with the following signal inputs.
525i (480i), 625i (576i), 1125 (1080)/60i, 1125 (1080)/50i, Y/C signal, VIDEO signal.
1) Press
as
to select [DIGITAL CINEMA REALITY].
2) Press
qw
or the <ENTER> button.
f
The [DIGITAL CINEMA REALITY] individual adjustment screen is displayed.
3) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[OFF]
Disables [DIGITAL CINEMA REALITY].
[ON]
Enables [DIGITAL CINEMA REALITY].
[NOISE REDUCTION]
(Only when the <VIDEO IN> terminal or <COMPUTER 1 IN> terminal
*1
is selected)
You can reduce noises when the input image is degraded and noise is occurring in the image signal.
1) Press
as
to select [NOISE REDUCTION].
2) Press
qw
or the <ENTER> button.
f
The [NOISE REDUCTION] individual adjustment screen is displayed.
3) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[OFF]
Disables [NOISE REDUCTION].
[ON]
Enables [NOISE REDUCTION].
*1 When [COMPUTER1 INPUT SETTING] is set to [Y/C] (
Æ
page 78)
Attention
f
When this is set for an input signal with less noise, the image may look different from what it originally was. In such a case,
set it to [OFF].
[TV-SYSTEM]
(Only when the <VIDEO IN> terminal or <COMPUTER 1 IN> terminal
*1
is selected)
The projector will automatically detect the input signal, but you can set the color system manually when an unstable signal is
input. Set the color system matching the input signal.
*1 When [COMPUTER1 INPUT SETTING] is set to [Y/C] (
Æ
page 78)
1) Press
as
to select [TV-SYSTEM].
2) Press
qw
or the <ENTER> button.
f
The [TV-SYSTEM] individual adjustment screen is displayed.
3) Press
qw
to select the color system.
f
The items will switch each time you press the button.
f
Select among [AUTO], [NTSC], [NTSC4.43], [PAL], [PAL-M], [PAL-N], [PAL60] and [SECAM].
f
Set it to [AUTO] normally. (Setting [AUTO] will automatically select [NTSC], [NTSC4.43], [PAL], [PAL-M], [PAL-N],
[SECAM], or [PAL60].)
[RGB/YP
B
P
R
] / [RGB/YC
B
C
R
]
Set it to [AUTO] normally. If images are not displayed correctly when this is set to [AUTO], set either [RGB], [YC
B
C
R
] or [YP
B
P
R
]
in accordance with the input signal.
1) Press
as
to select [RGB/YP
B
P
R
] or [RGB/YC
B
C
R
].
60 -
ENGLISH
Chapter 4 Settings - [PICTURE] menu
