ENGLISH -
55
Settings
Custom adj.
Adjust the screen scale and position manually with
this function.
Press ▲▼ to select [Custom adj.].
1 )
Press ► or the <ENTER> button to
2 )
enter the next submenu.
Press ▲▼ to choose the item you
3 )
want to adjust.
You can choose one from the items as below:
z
Scale H/V
Adjust the Horizontal/Vertical screen
scale.
H&V
When set to [On], the aspect ratio is
fixed.
Position H/V
Adjust the Horizontal/Vertical screen
position.
Common
Save the adjusted scale or position
to all the inputs.
Reset
Reset the all adjusted values.
Digital zoom +
Zoom in the images.
Press ▲▼ to select [Digital zoom +]
1 )
and then press the <ENTER> button.
The On-Screen Menu disappears and
z
[D. zoom + ] appears.
Press the <ENTER> button to zoom in
2 )
the image size and
press ▲▼ ◄► to
move the image to the top/bottom/left/
right of the screen.
The Panning function can work only when the
z
image is larger than the screen size. A projected
image can be also expanded by pressing the
<D.ZOOM +> or the <ENTER> button.
Digital zoom –
Zoom out the images.
Press ▲▼ to select [Digital zoom –]
1 )
and then press the <ENTER> button.
The On-Screen Menu disappears and
z
[D.zoom –] appears.
Press the <ENTER> button to zoom
2 )
out image size.
The projected image can be also compressed
z
by pressing the <D.ZOOM –> or the <ENTER>
button.
To exit the Digital zoom +/– mode, press any button
except the <D.ZOOM +/–>, <ENTER> and ▲▼◄►
buttons.
To return to the previous screen size, select a screen
size from the Screen Size Adjustment Menu or select
an input source from the Input Source Selection Menu
(
Æ
page 45) again, or adjust the screen size with the
<D.ZOOM +/–> buttons.
Note
When input computer signal to the projector, [D.ZOOM
z
+/–] will be available.
[Digital zoom +/-] cannot be selected when [True] is
z
selected in the Screen menu
.
[Digital zoom -] cannot be selected when [Custom] is
z
selected in the Screen menu
.
[Digital zoom +/–] are disabled and cannot be displayed
z
when [480i], [576i], [480p], [576p], [720p], [1 035i] or
[1 080i] is selected in the PC System Menu
(
Æ
page 46
)
.
When [Digital zoom +/–] functions are disabled,
z
mark
will appear.
Keystone
This function is used to adjust keystone distortion of
the projected image.
Press ▲▼ to select [Keystone].
1 )
Press ► or the <ENTER> button.
2 )
Press ▲▼ to choose the item you
3 )
want to adjust.
Keystone
To correct keystone distortion
Store
To store or reset the keystone
correction
Store
Keep the keystone correction ever
when the AC power cord is plugged
out or turned off the projector.
Reset
Release the keystone correction
when the AC power cord is plugged
out.
Note
For more details about the keystone correction, refer to
z
"Using the KEYSTONE button" (page 39).
Screen
The following items are the
submenu of [Store].
