[NETWORK] menu
On the menu screen, select [NETWORK] from the main menu, and select an item from the submenu.
Refer to "Navigating through the menu" (
Æ
page
45
) for the operation of the menu screen.
After selecting the item, press
f
asqw
to set.
[WIRED LAN]
You can make detailed wired LAN settings.
Press
1)
as
to select [WIRED LAN].
Press the <ENTER> button.
2)
The [WIRED DETAILED SETUP] screen is displayed.
f
Press
3)
as
to select an item, and change the setting according to the instructions.
[DHCP]
[ON]:
If a DHCP server exists in the network to which the projector is connected,
the IP address will automatically be acquired.
[OFF]:
If a DHCP server does not exist in the network to which the projector is
connected, additionally set [IP ADDRESS], [SUBNET MASK] and
[DEFAULT GATEWAY].
[IP ADDRESS]
Enter the IP address if DHCP server is not used.
[SUBNET MASK]
If not using a DHCP server, enter the subnet mask.
[DEFAULT GATEWAY]
Enter the gateway address if DHCP server is not used.
[DNS1]
Enter the DNS server address if DHCP server is not used.
[DNS2]
Enter the alternate DNS server address if DHCP server is not used.
Press
4)
as
to select [OK], and press
the
<ENTER> button.
Default wired LAN settings
r
The following settings are set before the projector leaves the factory.
f
[DHCP]
OFF
[IP ADDRESS]
192.168.10.100
[SUBNET MASK]
255.255.255.0
[DEFAULT GATEWAY]
192.168.10.1
[DNS1] / [DNS2]
NONE
Note
When using a DHCP server, confirm that the DHCP server is running.
f
Consult your network administrator regarding the IP ADDRESS, SUBNET MASK, and DEFAULT GATEWAY.
f
76 -
ENGLISH
Chapter 4 Settings - [NETWORK] menu
