Specifications
Model No.
PT-VW340Z
PT-VX410Z
Power supply
AC100 V - 240 V, 50 Hz/60 Hz
Power consumption
100 V - 240 V, 3.5 A-1.3 A, 300 W
When [STANDBY MODE] of [PROJECTOR SETUP] is set to [ECO]: 0.4 W
When [STANDBY MODE] of [PROJECTOR SETUP] is set to [NORMAL]: 9 W
LCD
panel
Panel size
1.5 cm(0.59")
(aspect ratio 16 : 10)
1.6 cm(0.63")
(aspect ratio 4 : 3)
Display method
3 transparent LCD panels (RGB)
Drive method
Active matrix method
Pixels
1 024 000
(1 280 x 800) x 3 panels
786 432
(1 024 x 768) x 3 panels
Lens
Manual zoom (1.6x) / Manual focus
F 1.6 to 2.12, f 15.30 mm to 24.64 mm
Luminous lamp
230 W UHM lamp
Light output *
1
3 700 lm
4 200 lm
Contrast ratio *
2
3 000 : 1 (all white / all black)
([LAMP POWER] is set to [NORMAL],
meanwhile [IRIS] is set to [ON])
4 000 : 1 (all white / all black)
([LAMP POWER] is set to [NORMAL],
meanwhile [IRIS] is set to [ON])
Appli-
cable
scanning
frequen-
cy *
3
for Video signal (in-
cluding S-video)
Horizontal 15.75 kHz / 15.63 kHz, Vertical 60 Hz / 50 Hz
for RGB signal
Horizontal 15 kHz to 100 kHz, Vertical 50 Hz to 100 Hz
Dot clock frequency: 140 MHz or less
for YP
B
P
R
signal
[525i(480i)]
Horizontal 15.75 kHz, Vertical 60 Hz
[525p(480p)]
Horizontal 31.50 kHz, Vertical 60 Hz
[750(720)/60p]
Horizontal 45.00 kHz, Vertical 60 Hz
[1125(1080)/60i] Horizontal 33.75 kHz, Vertical 60 Hz
[625i(576i)]
Horizontal 15.63 kHz, Vertical 50 Hz
[625p(576p)]
Horizontal 31.25 kHz, Vertical 50 Hz
[750(720)/50p]
Horizontal 37.50 kHz, Vertical 50 Hz
[1125(1080)50i]
Horizontal 28.13 kHz, Vertical 50 Hz
HD/SYNC and V terminals are not compliant with 3 value composite SYNC
for HDMI signal
525p(480p), 625p(576p), 750(720)/60p, 750(720)/50p, 1125(1080)/24p,1125(1080)/24sF,
1125(1080)/30p, 1125(1080)/60p, 1125(1080)/50p, 1125(1080)/60i, 1125(1080)/50i
Displayable resolution: VGA to WUXGA (non-interlace)
Dot clock frequency: up to 162 MHz
Color system
7 (NTSC, NTSC4.43, PAL, PAL-N, PAL-M, SECAM, PAL60)
Projection size
0.76 m -7.62 m (30"-300")
Screen aspect ratio
16 : 10
4 : 3
Projection scheme
[
FRONT/DESK
]
,
[
FRONT/CEILING
]
,
[
REAR/DESK
]
,
[
REAR/CEILING
]
(Menu setting system)
Speaker
1 (4.0 cm round-type)
Maximum usable volume output
10 W
These values of light output are measured under the condition that [LAMP POWER] is set to [NORMAL], [PICTURE
*1
MODE] is set to [DYNAMIC] . Measurement, measuring conditions and method of notation all comply with ISO21118
international standards.
The value of contrast ratio is measured under the condition that [LAMP POWER] is set to [NORMAL], [PICTURE MODE]
*2
is set to [DYNAMIC], [IRIS] is set to [ON]. Measurement, measuring conditions and method of notation all comply with
ISO21118 international standards.
For details of video signals that can be projected using this projector, refer to “List of compatible signals”. (
*3
Æ
pages 108-109)
110 -
ENGLISH
Chapter 6 Appendix - Specifications
