70 - ENGLISH
[Network information]
1) Press
as
to select [Network].
2) Press the <ENTER> button.
f
The [Network] screen is displayed and then confirm the following items.
[MAC address]
Displays the MAC address of this projector.
[IP address]
Displays the current IP address of this projector.
[Remote control]
This switching function prevents remote control interference when operating several projectors or video equipment at the same
time.
1) Press
as
to select [Remote control].
2) Press the <ENTER> button.
f
The [Remote control] screen is displayed.
3) Press
as
to select one item.
f
This projector provides 7 different remote control codes: [All], [Code 1]~[Code 6].
[All]
Select when controlling projectors without specifying an ID number.
[Code 1] - [Code 6] Select when specifying an ID number to control individual projector.
4) Press the <ENTER> button.
f
[Remote control] is set.
Note
f
To specify an ID number for individual control, the ID number of a remote control must match the ID number of the projector.
f
When the ID number is set to [All], the projector will operate regardless of the ID number specified by remote control. If
multiple projectors are set up side by side with ID set to [All], they cannot be controlled separately from the projectors with
other ID numbers.
f
Refer to “Setting Remote control ID numbers” (
x
page 24) for how to set the ID number on the remote control.
[Factory default]
Return various setting values to their factory default settings.
1) Press
as
to select [Factory default].
2) Press the <ENTER> button.
f
The [Return to Factory default?] screen is displayed.
3) Press
as
to select [Yes] and then press the <ENTER> button.
f
The [OK?] screen is displayed.
4) Press
as
to select [Yes] and then press the <ENTER> button.
f
The [Please wait...] message will appear, and resetting operation will start, and after completing the operation, the
[Please wait...] message will disappear.
Attention
f
After executing the [Factory default], be sure to turn off the projector (
x
page 36), disconnect the power plug from the wall
outlet, and then turn on the projector in order to reflect the initial setting values.
Note
f
When [Factory default] is executed, all setting values except for User Logo, PIN code lock, Logo PIN code lock, Lamp
counter, Filter counter and Logo select to the factory default settings.
Chapter 4 Settings - [Expand] menu
