LAN
48
- ENGLISH
Settings
Projector Status and Control
J
Sets the projector status and adjusts Image and Audio controls.
E-mail Setting
J
Sets E-mail Alert and SMTP Setting and Alert Condition of the projector and press [Save] to store settings.
Note
The E-mail function of this projector does not compatible
z
with the advanced SMTP server.
Security Setting
J
Sets a password for the administrator to manage the Web.
(1)
(2)
(3)
(1)
(1) [Administrator]
When set the password, click [Enable] and enter
both of [New Password] and [Confirm Password]
{4
characters in single byte (0~9, A~Z, a~z)}
, and then
click [Submit].
(1)
(2)
(3)
(1) [Projector Status]
Confirm Projector Status.
Press [Refresh] button to refresh.
Press [Power ON] or [Power OFF] button to operate
power status.
Set the time for the projector to shut down
automatically when there is no signal input in [Power
Saving].
Confirm the [Alert status] of abnormal conditions.
(2) [Image Control]
Adjust projector image.
Use the [Auto Adjust] button to adjust image to the
best position and size.
(3) [Audio Control]
Adjust projector volume.
(1) [E-mail Alert]
Click [Enable] when using the E-mail function.
Login [TO], [CC], [From] of the E-mail address to
enable the abnormal E-mail notification.
{up to 40 characters in single byte (15+@+24)}
You can enter [Subject] information such as the
location of the projector that notifies the sender of the
E-mail. (up to 30 characters in single byte )
(2) [SMTP Setting]
Login [Out going SMTP server]
(up to 30 characters in single byte )
(3) [Alert Condition]
Login [Lamp warning], [Lamp life reminder],
[Temperature warning] of the Alert Condition to
enable the abnormal E-mail notification. (
Æ
page 58)
