S
P
E
C
F
I
L
E
PT-
ST10
Short-Throw LCD Projector
As of July 2010
< 11 >
SFL10M003
Notes on projector placement and operation
The projector uses a high-wattage lamp that becomes very hot during operation. Please observe the
following precautions.
1.
Never place objects on top of the projector while it is operating.
2.
Make sure there is an unobstructed space of 500 mm (19-11/16˝) or more around the projector’s
exhaust openings.
3.
Make sure that nothing blocks the projector’s air intake and exhaust openings. Also, install the pro-
jector so that cool or hot air from other air conditioning equipment does not flow directly toward
the projector’s air intake or exhaust openings.
4.
Do not install the projector in an enclosed space. If it is necessary to install it in an enclosed
space, add a separate ventilation system. If ventilation is insufficient, hot air will accumulate at the
intake opening. This may cause the projector’s protective circuit to interrupt projector operation.
Direction of air intake and exhaust
200 mm (7-7/8˝)
or more
500 mm (19-11/16˝)
or more
500 mm (19-11/16˝)
or more
Operating the projector continuously
1.
If the projector is to be operated continuously 10 hours or more, lamp replacement cycle duration
becomes shorter.
2.
The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for short
periods (one hour or less).
Intake
Exhaust
Weights and dimensions shown are approximate. Specifications are subject to change without notice.
PJLink is a registered trademark, or a trademark application has been filed, in Japan, the United States, and other countries and regions.
This product may be subject to export control regulations. All other trademarks are the property of their respective trademark owners.
