Chapter 4
Settings — [PROJECTOR SETUP] menu
124 - ENGLISH
[LENS]
Perform the setting and operation regarding the projection lens.
[LENS TYPE]
When the projector is used for the first time or when the projection lens is replaced, confirm the [LENS TYPE]
setting. Change the setting if the type does not match the projection lens attached to the projector.
1) Press
as
to select [LENS].
2) Press the <ENTER> button.
f
The
[LENS]
screen is displayed.
3) Press
as
to select [LENS TYPE].
4) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[NORMAL]
Select this item when a projection lens anything other than the Fixed-focus Lens (Model No.:
ET-DLE035) is used for projection.
[ET-DLE035]
Select this item when the Fixed-focus Lens (Model No.: ET-DLE035) is used for projection.
Note
f
The projection lens is not moved to the correct home position when the [LENS TYPE] is set incorrectly.
[LENS HOME POSITION]
Operate in following procedure to move the projection lens to the home position.
1) Press
as
to select [LENS].
2) Press the <ENTER> button.
f
The
[LENS]
screen is displayed.
3) Press
as
to select [LENS HOME POSITION].
4) Press the <ENTER> button.
f
The confirmation screen is displayed.
5) Press
qw
to select [OK], and press the <ENTER> button.
f
[PROGRESS] is displayed in the
[HOME POSITION]
screen, and the projection lens is moved to the origin
position.
Note
f
The projection lens is not moved to the correct home position when the [LENS TYPE] is set incorrectly. Change the setting if the type does
not match the projection lens attached to the projector.
f
The home position does not match with the optical image center position.
f
The home position varies depending on the projection lens type. Refer to “Lens shift range” (
x
page 71) for details.
f
The home position of the Fixed-focus Lens (Model No.: ET-DLE035) may deviate from the designed position.
f
[LENS HOME POSITION] can also be executed by pressing the <DEFAULT> button on the remote control while the lens shift adjustment
screen is displayed.
[LENS CALIBRATION]
Detect the lens shift adjustment limit value, and perform the calibration in the adjustment range.
1) Press
qw
to select [LENS].
2) Press the <ENTER> button.
f
The
[LENS]
screen is displayed.
3) Press
as
to select [LENS CALIBRATION].
4) Press the <ENTER> button.
f
The confirmation screen is displayed.
