Chapter 7
Appendix — Installing the Interface Board (optional)
264 - ENGLISH
How to remove the Interface Board
Handle
Fig. 1
1) Remove the Interface Board. (Fig. 1)
f
Remove the four screws fixing the Interface Board by rotating counterclockwise with a Phillips screwdriver.
The removed screws are used to fix the slot cover.
f
Hold the handle of the Interface Board and remove it slowly.
2) Attach the slot cover.
f
Attach the stored slot cover, and tighten and fix with the four screws removed in Step
1)
.
f
To replace with other Interface Board, attach the Interface Board following the procedure in “How to install
the Interface Board” (
x
page 263).
Attention
f
Always attach the slot cover on the blank slot.
f
Store the removed Interface Board inside an antistatic bag.
