Panasonic PT-FW300U - LCD Proj Wxga 600:1 3500 Lumens Enet 13.7LBS H/v Lens, Operating Instructions Manual

Page: 27 / 72

Basic O
peration
Remote control operation
E
NGLISH - 27
Press the FREEZE button to capture the image
and stop the audio, and you can see it as a still
picture while the AV equipment are continuing.
Press the FREEZE button again to escape and return to
the continuing image.
You can stop the projection and audio sound
through the projector for saving electrical power. Press the AV MUTE button again to escape.
You can reset most of the customized settings
to the factory defaults by pressing the
DEFAULT button of the remote control. Display
the required sub menu or the menu items, and
press the
DEFAULT button again.
See “Main menu and Sub-menu” on page 30.
You can project an image in split 2 windows as an INDEX-WINDOW , one is frozen, stored in memory and
displayed on the screen’s left side, while the display of subsequent images continues on the right.
To escape from the INDEX-WINDOW , press the MENU
or RETURN button.
Q
Switching the position
In default, the frozen image is displayed on the left
and the subsequent image is displayed on the
right. Press
I H
to switch the position.
Q
Changing the image size
Press
F G
to capture a new image and change
the size in 2 ways.
Q
Capturing a new image
While in INDEX-WINDOW mode, press the
ENTER button to capture a new image and the
frozen image window will be updated in a while.
Capturing an image
Stopping the projection
Resetting to the factory default settings
NOTE:
• Some menu items are not available to reset by pressing
the DEFAULT button. Adjust each menu items
manually.
• To reset all the settings to the factory defaults, see
“INITIAL START UP” on page 41.
Projecting an image in INDEX-WINDOW mode
Projected image
Frozen image
Continuing image
Frozen image
Continuing image
Continuing image
Frozen image
NOTE:
• If you change the window size, the aspect ratio of the
image is changed and becomes vertically elongated.
• When vertically enlarged, some signals image with
THROUGH aspect ratio setting will not be displayed
correctly.
NOTE:
• When capturing a quick moving picture, perform
several times to get a stabled image.
Frozen image
Continuing image