E
NGLISH - 24
B
asi
c Op
eration
Projecting an image
1. Switch on the connected devices.
Press the play button of the required device.
2. Press the
INPUT SELECT
buttons to select the
required input method if needed. See “Switching
the input signal” on page 26.
The image will be projected on the screen.
1. Open the
Front panel cover
.
2. Adjust the projected image with the
Lens shift
lever
. See “Lens shift and positioning” on page 18.
3. Adjust the angle of the projector.
Screw down the
Front leg adjusters
and adjust the
angle vertically.
See “Front leg adjusters and throwing angle” on
page 17.
4. Adjust the focus and the projected image size.
Turn the
Focus lever
and
Zoom lever
to adjust the
image.
You can confirm the adjusted effect with the
TEST
PATTERN
in
OPTION
Selecting the input signal
NOTE:
•
SIGNAL SEARCH
is
ON
as default and the signal from
the connected devices is detected automatically. See
“SIGNAL SEARCH” on page 37.
Positioning the image
NOTE:
• Do not touch the
Air Exhaust port
as this may cause
burns or injury.
• If keystone distortion occurs, see “KEYSTONE” on
• If you adjust the focus, you may need to adjust the size
of the image by moving the
Zoom lever
again.
Focus lever
Zoom lever
