Basic O
p
eration
Switching the projector on/off
E
NGLISH - 23
1. Switch the
MAIN POWER
on.
The power indicator lights up in
RED
.
2. Open the
Front panel cover
.
This is not necessary in
Remote control
operation.
3. Press the
POWER
button.
The power indicator lights up in
GREEN
after
flashing for a while.
The
STARTUP LOGO
is displayed on the screen.
See “STARTUP LOGO” on page 36.
1. Open the
Front panel cover
.
This is not necessary in
Remote control
operation.
2. Press the
POWER
button.
The confirmation screen is displayed. It will
disappear and return to the projection after
10 seconds without any operation.
To return to the projection, press any button except
the
POWER
button.
3. Press the
POWER
button.
The power indicator lights up in
ORANGE
while
cooling the lamp, then illuminates
RED
when is
ready to switch off the
MAIN POWER
.
4. Switch off the
MAIN POWER
on the back of the
projector.
Switching on the projector
NOTE:
• When starting up the projector, some small rattling or tinkling sound may be heard, or the display may flicker for the
characteristics of the lamp. Those are normal and do not affect the performance of the projector.
• If you disconnected the
Mains lead
or switched off the
MAIN POWER
while on projecting mode, the projection will start
with connecting the
Mains lead
or switching on the
MAIN POWER
. See “DIRECT POWER ON” on page 37.
Switching off the projector
NOTE:
• Press the
POWER
twice or for a long duration to switch the power off.
• You can disconnect the
Mains lead
or switch off the
MAIN POWER
instead of following this procedure. See “DIRECT
• You can turn off the projector by pressing the
POWER
button longer than 0.5 seconds.
