Panasonic PT-FW100NTE, Service Manual

Page: 23 / 101

8 Measurement and Adjustments
8.1. Adjustment Procedure Flowchart
8.2. Cautions for Adjustment
· Never unplug the power cord until the power indicator on the projector illuminates red.
·
To maintain and ensure safety, always use the designated components for replacement parts.
· If removing any clamps, lead wires or connectors, always place them back in their proper locations.
· Be careful not to damage the lead wires or components when using a soldering iron or similar tool.
8.3. Setting Before Adjustment
· Set up the projector to obtain the projection distance below.
· Turn the zoom ring of the projector to obtain the largest size of the picture.
8.4. Convergence Adjustment
Execute this adjustment when replacing the LCD panel (B) .
8.4.1. Tools to be used
Service Kit : This kit is composed of 3 extension flexible cables.
Note:
·
Consult your dealer or Authorized Service Center for the service kit.
8.4.2. Preparation
1. Loosen 2 screws fixing the panel adjuster and 3 screws fixing the panel attachment, then tighten the 5 screws temporarily just
until the LCD panel can be shifted by your fingers.
23
PT-FW100NTU / PT-FW100NTE / PT-FW100NTEA