Panasonic PT-EX620 Operating Instructions Manual Download Page 31

Page: 31 / 164

Chapter 2

Getting Started — Setting up

ENGLISH - 31

Setting up

Installation mode

There are four ways to set up the projector. Set the [PROJECTOR SETUP] menu

→

[PROJECTION METHOD]

(

page 93) depending on the installation method.

Mounting on the ceiling and projecting forward

Mounting on the ceiling and projecting from rear

(Using the translucent screen)

Menu item

Method

Menu item

Method

[PROJECTION METHOD]

[AUTO] or [FRONT/CEILING]

[PROJECTION METHOD]

[REAR/CEILING]

Setting on a desk/floor and projecting forward

Setting on a desk/floor and projecting from rear

(Using the translucent screen)

Menu item

Method

Menu item

Method

[PROJECTION METHOD]

[AUTO] or [FRONT/DESK]

[PROJECTION METHOD]

[REAR/DESK]

Note

The projector has a built-in angle sensor. When projecting in front of the screen, if set the [PROJECTOR SETUP] menu → [PROJECTION

METHOD] → [AUTO], the projector’s posture will be detected automatically. When projecting from rear, please set the [PROJECTION

METHOD] to [REAR/DESK] or [REAR/CEILING].

Angle sensor

The range of installation posture detected by the projector’s built-in angle sensor is as follows.

30°
30°

：

[FRONT/DESK]

[FRONT/CEILING]

Projection direction

Parts for ceiling mount (optional)

The projector can be installed on the ceiling by combining the optional Ceiling Mount Bracket (Model No.:

ET-PKD120H (for High Ceilings), ET-PKD120S (for Low Ceilings)) and ET-PKE300B (Projector Mount Bracket).

Be sure to use the Ceiling Mount Bracket specified for this projector.

Refer to the Installation Instructions supplied with the Ceiling Mount Bracket when installing the projector with

the bracket.

Summary of Contents for PT-EX620





































































































































































Search results

Summary of Contents for PT-EX620

Reviews:

Brands by name

Popular brands

Panasonic PT-EX620, Operating Instructions Manual

Search results

Summary of Contents for PT-EX620

Reviews:

Brands by name

Popular brands