Chapter 4
Settings — [PROJECTOR SETUP] menu
ENGLISH - 103
2) Press the <ENTER> button.
f
The confirmation screen is displayed.
3) Press
qw
to select [OK], and press the <ENTER> button.
f
To cancel, select [CANCEL].
f
The lens moves up, down, left, and right to automatically detect the lens shift limit value, and automatically
set the home position.
f
The lens stops to complete the calibration.
Note
f
[NOW CALIBRATING...] is displayed during lens calibration. Cannot cancel mid-operation.
f
When lens calibration executes correctly, [COMPLETE] is displayed and [INCOMPLETE] is displayed when it does not execute correctly.
[INITIALIZE ALL]
Return various setting values to their factory default settings.
1) Press
as
to select [INITIALIZE ALL].
2) Press the <ENTER> button.
f
The
[INITIALIZE ALL]
screen is displayed.
3) When the confirmation screen is displayed, press
qw
to select [OK] and then press the <ENTER>
button.
f
The
[NOW INITIALIZING...]
screen is displayed and then the
[POWER OFF.]
screen will be displayed.
4) Press the <ENTER> button.
f
The operation of other buttons is disabled.
f
The focus adjustment screen and the initial setting (display language) screen will be displayed successively
when the projector is switched on the next time.
Note
f
The projector will enter the standby status to reflect the setting values when [INITIALIZE ALL] is executed.
f
When [INITIALIZE ALL] is executed, [STANDBY MODE], [EMULATE], [FILTER COUNTER] and the setting values of [NETWORK] cannot be
returned to the factory default values.
For details about the initialization of [NETWORK], please refer to [NETWORK] → [INITIALIZE]. (
Æ
page 110)
[SERVICE PASSWORD]
This function is used by a service person.
