background image

2

Dear Panasonic Customer:

This instruction booklet provides all the necessary operating information that you might require. We hope it will help
you to get the most performance out of your new product, and that you will be pleased with your Panasonic DLP

TM

based projector.
The serial number of your product may be found on its back. You should note it in the space provided below and
retain this booklet in case service is required.

Model number: 

PT-D4000E

Serial number:

IMPORTANT SAFETY NOTICE

WARNING: THIS APPARATUS MUST BE EARTHED.

WARNING: To prevent damage which may result in fire or shock hazard, do not expose

this appliance to rain or moisture.

Machine Noise Information Ordinance 3. GSGV, January 18 1991: The sound pressure level

at the operator position is equal or less than 70 dB (A) according to ISO 7779.

WARNING:

1) Remove the plug from the wall outlet when this unit is not in use for a prolonged period of time.

2) To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to qualified

service personnel.

3) Do not remove the earthing pin on the power plug. This apparatus is equipped with a three prong earthing-

type power plug. This plug will only fit an earthing-type power outlet. This is a safety feature. If you are unable

to insert the plug into the outlet, contact an electrician. Do not defeat the purpose of the earthing plug.

CAUTION:

To assure continued compliance, follow the attached installation instructions, which include using the shielded

interface cables when connecting to a computer or peripheral device.

Pursuant to at the directive 2004/108/EC, article 9(2)

Panasonic Testing Centre
Panasonic Service Europe, a division of
Panasonic Marketing Europe GmbH
Winsbergring 15, 22525 Hamburg, F.R. Germany

D4000E̲En̲0607    07.6.8  11:00    ページ 2

Summary of Contents for PT-D4000E





























































Reviews: